Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:
SCPI command reference
DMM7510-901-01 Rev. B / May 2015 6-115
[:SENSe[1]]:CONFiguration:LIST:CATalog?
This command returns the name of one measure configuration list that is stored on the instrument.
Type Affected by Where saved Default value
Query only Not applicable Not applicable Not applicable
Usage
[:SENSe[1]]:CONFiguration:LIST:CATalog?
Details
You can use this command to retrieve the names of measure configuration lists that are stored in the
instrument.
This command returns one name each time you send it. This command returns an empty string when
there are no more names to return. If the command returns an empty string the first time you send it,
no measure configuration lists have been created for the instrument.
Example
CONF:LIST:CAT?
Send this command to retrieve the name of one measure
configuration list. To get all stored lists, send it again until it
returns an empty string.
Also see
Configuration lists (on page 3-37)
[:SENSe[1]]:CONFiguration:LIST:CREate (on page 6-116)

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English