Keithley DMM7510 Reference Manual

Section
2: General operation Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
2-58 DMM7510-901-01 Rev. B / May 2015
Customizing a message for the USER swipe screen
You can customize the message that is displayed on the USER swipe screen.
You must use a remote interface to customize the USER swipe screen.
Creating a message
When you create the message, you can send text that will be used on the top and bottom lines of the
USER swipe screen. The top line allows up to 20 characters and the bottom line allows up to 32
characters.
The examples shown here switch the display to the USER swipe screen, set the first line to read
"Test in process," and the second line to display "Do not disturb."
Using SCPI commands:
Send the commands:
DISPlay:SCReen SWIPE_USER
DISPlay:USER1:TEXT "Test in process"
DISPlay:USER2:TEXT "Do not disturb"
Using TSP commands:
Send the commands:
display.changescreen(display.SCREEN_USER_SWIPE)
display.settext(display.TEXT1, "Test in process")
display.settext(display.TEXT2, "Do not disturb")
Clearing the USER swipe screen
You can clear the message that is displayed on the USER swipe screen.
Using SCPI commands:
Send the command:
:DISPlay:CLEar
Using TSP commands:
Send the command:
display.clear()

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English