7.3.3.3 External master values
The Virtual mas
ter control signals parameter can be used to switch over the master value
source when the controller is enabled. 40x5045:010 Bit 31
If bit 31 of the Virtual master control signals parameter is set to TRUE, the external master
value sources are deselected. The virtual master takes over the moon control and synchroni-
ses itself via the selected master value source.
Prole calculaon parameters:
•
Virtual master
acceleraon 40x5046:003
•
Virtual master deceleraon 40x5046:004
•
Virtual master jerk 40x5046:005
•
Clutch-in direcon virtual master 0x5046:030
Conguring the "Electronic Gearbox" TA
Mas
ter value sources
Virtual master
112
To Next Page
Loading...
Need help?
General
