Lenze I95AE240F User Manual

Address Name / seng range / [default seng] Info
0x5863:011 Mandatory EtherCAT slaves: Slave 11 is mandatory
•
R
ead only
0 FALSE
1 TRUE
0x5863:012 Mandatory EtherCAT slaves: Slave 12 is mandatory
•
Read only
0 FALSE
1 TRUE
0x5863:013 Mandatory EtherCAT slaves: Slave 13 is mandatory
•
Read only
0 FALSE
1 TRUE
0x5863:014 Mandatory EtherCAT slaves: Slave 14 is mandatory
•
Read only
0 FALSE
1 TRUE
0x5863:015 Mandatory EtherCAT slaves: Slave 15 is mandatory
•
Read only
0 FALSE
1 TRUE
0x5864:001 EtherCAT slaves inialisaon status: Initalisaon sta-
tus slave 1
•
Read only
Display of the inialisaon state of the EtherCAT slave.
0 No Error
1 No access
2 Vendor ID check failed
3 Product code check failed
4 Revision check failed
0x5865:001 EtherCAT slaves device status: Device status slave 1
•
R
ead only
Display of the device status of the EtherCAT slave.
0 Unknown
1 Init
2 Pre-Operaonal
3 Bootstrap
4 Safe-Operaonal
8 Operaonal
65519 Not Present
16.4.5.3 Device idencaon
For device idencaon in the system bus network, the inverter provides the standard Ether-
CA
T parameters 0x1018:001 ... 0x1018:004.
The EtherCAT product code in 0x1018:002 consists of device-specic data and the currently
acvated technology applicaon (0x4000). The last three posions in the product code refer
to the acvated technology applicaon.
The 0x2372:009 par
ameter indicates the funconality of the system bus interface of the inver-
ter (EtherCAT master/slave).
Parameter
Address Name / seng range / [default seng] Info
0x1018:001 Identy object : Vendor ID
•
R
ead only
Display of the manufacturer's idencaon number.
0x1018:002 Identy object : Product ID
•
Read only
Display of the product code of the inverter.
419446784
419479552
419479592
Conguring the network
E
therCAT system bus
Diagnoscs
351

Lenze I95AE240F Specifications

General

Brand	Lenze
Model	I95AE240F
Category	Inverter
Language	English