Lenze I95AE240F User Manual

6.3.4 Source of monitoring signal
A monitoring signal can be selected for control word 6 and control word 7.
The source for the monitoring signal to be output is selected via the Sour
ce for monitoring
signal parameter. The number of decimal posions transferred depends on the value selected.
•
Selecon for control word 6: 40x5040:006
•
Selecon for control word 7: 40x5040:007
The source for the monitoring signal to be output is selected via the Source for monitoring
signal parameter. The number of decimal posions transferred depends on the value selected.
0x5030:006
0x50 0:0064
(Source onitoring ignal )m s 1
None
Actual motor temperature
Actual motor current
DC bus voltage
Thermal load device
Termmal load motor
Analog input
0x50 0:1164
(Monitoring ignal )s 1
Velocity offset total
Fig. 23: Selecon of digital output
0x50 0:0074
(Source onitoring ignal )m s 2
None
Actual motor temperature
Actual motor current
DC bus voltage
Thermal load device
T mal load motorher
Analog input
0x50 0: 11 74
(Monitoring ignal )s 2
Velocity offset total
Fig. 24: Selecon of digital output
Parameter
Address Name / seng range / [default seng] Info
0x5040:006 Display value 1 Signal selecon for the monitoring of signal 1 to status word 6.
Signal selecon for the monitoring of signal 2 to status word 7.
0 None Signal selecon for the monitoring of signal 1 to status word 6.
1 Actual motor temperature
2 Actual motor current
3 DC-bus voltage
4 Device ulisaon
5 Motor ulisaon
6 Analog input 1
13 Total velocity oset
Technology applicaon (TA) basic sengs
Dening control sources
Sour
ce of monitoring signal
82

Lenze I95AE240F Specifications

General

Brand	Lenze
Model	I95AE240F
Category	Inverter
Language	English