Lenze I95AE240F User Manual

Assignment of the user data depending on the data type
Depending on the data type used, the user data is assigned as follows:
Data type Length User data assignment
Byte 1 Byte 2 Byte 3 Byte 4 Byte ...
String x bytes Data (x b
ytes)
U8 1 byte Data 0x00
U16 2 bytes HIGH byte LOW byte
Data Data
U32 4 bytes HIGH word LOW word
HIGH byte LOW byte HIGH byte LOW byte
Data Data Data Data
16.3.5 Monitoring
The parameters for seng network monitoring funcons are described below.
Parameter
Address Name / seng range / [default seng] Info
0x2859:001 PROFINET monitoring: Watchdog elapsed Selecon of the response to a permanent interrupon of the communi-
caon to the IO controller.
Corr
esponding error code: 33168 | 0x8190 "PROFINET: Watchdog me-
out"
Associated error code:
•
33168 | 0x8190 - RANLI_CIMES_1000_20915
0 No response
1 Fault > CiA402
2 Warning
0x2859:002 PROFINET monitoring: Data exchange exited Selecon of the response to exing the "Data Exchange" state.
Corresponding error code: 33171 | 0x8191 "PROFINET: Exit Data
Exchange"
Associated error code:
•
33169 | 0x8191 - RANLI_CIMES_1000_21217
0 No response
1 Fault > CiA402
2 Warning
0x2859:003 PROFINET monitoring: Invalid conguraon Selecon of the response triggered by the recepon of invalid congura-
on data.
Corresponding error code: 33414 | 0x8286 "PROFINET: Conguraon
error"
Associated error code:
•
33415 | 0x8287 - RANLI_CIMES_1000_20916
0 No response
1 Fault > CiA402
2 Warning
0x2859:004 PROFINET monitoring: Inialisaon error Selecon of the response triggered by the occurrence of an error during
the inialisaon of the network component.
Corresponding error code: 33170 | 0x8192 "PROFINET: Inialisaon
error"
Associated error code:
•
33170 | 0x8192 - RANLI_CIMES_1000_20917
0 No response
1 Fault > CiA402
2 Warning
Conguring the network
PR
OFINET
Parameter data transfer
337

Lenze I95AE240F Specifications

General

Brand	Lenze
Model	I95AE240F
Category	Inverter
Language	English