Cisco A9K-SIP-700 Command Reference

This table describes the significant fields shown in the display.
Table 4: show pool ipv4 name Field Descriptions
DescriptionField
Specifies the VRF the pool is associated with.VRF
The unique pool ID of a specific pool.Pool ID
Pool scope belongs to the VRF specific pool.Pool Scope
Length of the prefix specified.Prefix Length
Related Commands
DescriptionCommand
Enables distributed address pool service on vrf.pool vrf, on page 90
Enables distributed address pool service on ipv4.pool ipv4, on page 92
Specifies a range of IP addresses that distributed
address pool service should not assign to clients.
exclude, on page 82
Specifies a range of IP addresses.address-range, on page 80
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
101
Address Pool Service Commands
show pool ipv4 name

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English