Cisco A9K-SIP-700 Command Reference

RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile client relay
RP/0/RSP0/CPU0:router(config-dhcpv4-relay-profile)# relay information option allow-untrusted
Related Commands
DescriptionCommand
Enables DHCP for IPv4 and enters
DHCP IPv4 configuration mode.
dhcp ipv4 (BNG), on page 147
Configures the DHCP relay agent
to relay packets to a specific DHCP
Server.
helper-address
Configures a DHCP server to
validate the relay agent information
option in forwarded BOOTREPLY
messages.
relay information check (BNG), on page 185
Enables the system to insert a
DHCP relay agent information
option in forwarded
BOOTREQUEST messages to a
DHCP server.
relay information option (BNG), on page 187
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
190
BNG DHCP Commands
relay information option allow-untrusted (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English