Cisco A9K-SIP-700 Command Reference

ppp chap
To enable a router calling a collection of routers to configure a common Challenge Handshake Authentication
Protocol (CHAP) for PPP interfaces, use the ppp chap command in the dynamic template configuration mode.
To disable this feature, use the no form of this command.
ppp chap hostname chap_hostname
no ppp chap
Syntax Description
Sets the CHAP hostname.hostname
Specifies the CHAP hostname.
chap_hostname
Command Default
None
Command Modes
Dynamic template configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the dynamic-template type ppp command to enter the ppp dynamic template type configuration mode.
Task ID
OperationTask ID
read, writeppp
Examples
This is an example of configuring the ppp chap command in the dynamic template configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp p1
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ppp chap hostname host1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
381
BNG PPP Commands
ppp chap

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English