redundancy (BNG)
To enable VPDN redundancy and to enter the VPDN redundancy configuration mode, use the redundancy
command in VPDN configuration mode. To disable VPDN redundancy, use the no form of this command.
redundancy
no redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
VPDN configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writetunnel
Examples
This is an example of enabling the vpdn redundancy and entering the vpdn redundancy configuration submode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# vpdn
RP/0/RSP0/CPU0:router(config-vpdn)# redundancy
RP/0/RSP0/CPU0:router(config-vpdn-redundancy)#
Related Commands
DescriptionCommand
Configures VPDN and enters the VPDN
sub-configuration mode.
vpdn, on page 424
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
417
PPPoE LAC-Specific Commands
redundancy (BNG)
To Next Page
Loading...
Need help?
General
