Cisco A9K-SIP-700 Command Reference

DescriptionField
Specifies the control policies that were executed for
DHCP and Packet Trigger.
Control-policy executed
Specifies the number of session features that were
applied for DHCP and Packet Trigger.
Session features applied
Specifies the VRFs configured.VRF configured
Specifies the number of packets that are in the UP
state.
Up
Specifies the number of packets that are in the DOWN
state.
Down
Specifies the number of packets that are
disconnecting.
Disconnecting
Specifies the number of packets that are disconnected.Disconnected
Specifies the packets that are in the unknown state.Unknown State
Specifies the number of packets that are errored out.Error
Related Commands
DescriptionCommand
Displays the subscriber management session
information.
ipsubscriber l2-connected, on page 280
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
295
IPoE Commands
show ipsubscriber summary

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English