Control Policy Commands
This module describes the Cisco IOS XR software commands used to configure the Control Policy commands
for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the
related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network
Gateway Configuration Guide.
•
activate, page 114
•
authenticate (BNG), page 116
•
authorize, page 118
•
class-map type control subscriber, page 120
•
deactivate, page 122
•
event, page 124
•
match (class-map), page 127
•
policy-map type control subscriber, page 129
•
policy-map type pbr, page 131
•
service-policy type control subscriber, page 133
•
show class-map, page 135
•
show policy-map, page 137
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
113
To Next Page
Loading...
Need help?
General
