class
To create a proxy profile class and to enter the proxy profile class sub configuration mode, use the class
command in an appropriate configuration mode. To disable this feature and exit the profile mode, use the no
form of this command.
class class_name {helper-address| match}{address-pool| dns-server| domain-name| prefix-pool}
no class class_name
Syntax Description
Specifies the class name.
class_name
Specifies the server address to relay packets.helper-address
Inserts a match keyword.match
Specifies the name of the address pooladdress-pool
Specifies the name of a dns server.dns-server
Specifies the name of a domain.domain-name
Specifies the name of the prefix pool.prefix-pool
Command Default
No class is specified.
Command Modes
DHCP IPv4 proxy profile configuration
DHCP IPv6 proxy profile configuration
DHCP IPv6 server profile configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
The support for IPv6 was added.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
145
BNG DHCP Commands
class
To Next Page
Loading...
Need help?
General
