Cisco A9K-SIP-700 Command Reference

show qos shared-policy-instance (BNG)
To list interface details for a specific location of a specific shared policy instance, attached to either an input
or output interface, use the show qos shared-policy-instance command in EXEC mode.
show qos shared-policy-instance instance-name {input| output} location node-id
Syntax Description
String of up to 32 characters to identify the shared policy instance.
instance-name
Displays details for the shared policy instance attached to the input interface.input
Displays details for the shared policy instance attached to the output interfaceoutput
Location of node. The node-id argument is entered in rack/slot/module
notation.
location node-id
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.7.2
This command was updated to support shared policy instance over
bundle interfaces.
Release 3.9.0
The command was supported in BNG.Release 4.3.0
This command was updated to support SPI over PW-Ether subinterface.Release 5.1.1
Usage Guidelines
To enter the dynamic template configuration mode, run dynamic-template command in the Global
Configuration mode
Task ID
OperationsTask ID
read, writeqos
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
504
QOS Commands
show qos shared-policy-instance (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English