Examples
This example shows how to enable the dhcpv4 configuration mode and how to create a profile called
dhcp_profile in the dhcpv4 configuration submode:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile dhcp_profile proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)#
This example shows how to enable the dhcpv6 configuration mode and how to create a profile called dhcp_v6
in the dhcpv6 configuration submode:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# profile dhcp_v6 proxy
RP/0/RSP0/CPU0:router(config-dhcpv6-proxy-profile)#
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
181
BNG DHCP Commands
profile (BNG)
To Next Page
Loading...
Need help?
General
