show l2tpv2
To display the tunnel-related information, use the show l2tpv2 command in the EXEC mode.
show l2tpv2{class| counters| session| statistics| tunnel}
Syntax Description
Displays the L2TP class details.class
Displays the L2TP counter information.counters
Displays the L2TP session information.session
Displays the L2TP protocol statistics.statistics
Displays the L2TP tunnel information.tunnel
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readipv4
readnetwork
Examples
This is the sample output of the show l2tpv2 command in the EXEC mode:
RP/0/RSP0/CPU0:router# show l2tpv2 class name c1
RP/0/RSP0/CPU0:router# show l2tpv2 counters forwarding tunnel id 67
RP/0/RSP0/CPU0:router# show l2tpv2 session brief if 89 789
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
428
PPPoE LAC-Specific Commands
show l2tpv2
To Next Page
Loading...
Need help?
General
