Cisco A9K-SIP-700 Command Reference

show dhcp ipv6 proxy profile
To display the proxy profile information for Dynamic Host Configuration Protocol (DHCP) proxy, use the
show dhcp ipv6 proxy profile command in EXEC mode.
show dhcp ipv6 proxy profile name profile_name{location| location}
Syntax Description
Displays the detailed proxy profile information for the profile.name
Specifies the name of the profile.
profile_name
Displays the node location by Interface.location
Displays the fully qualified location specification of an interface.
location
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readip-services
Examples
This is a sample output from the show dhcp ipv6 proxy profile command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy profile
Tue Sep 4 05:00:57.938 UTC
DHCP IPv6 Proxy Profiles
--------------------------
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
209
BNG DHCP Commands
show dhcp ipv6 proxy profile

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English