Cisco A9K-SIP-700 Command Reference

accounting aaa list type service
To configure the service accounting feature, use the accounting aaa list type service command in the dynamic
template configuration mode. To disable this feature, use the no form of this command.
accounting aaa list {method_list_name| default} type service [periodic-interval time]
no accounting aaa list {method_list_name| default} type service [periodic-interval time]
Syntax Description
Specifies the pre-configured method list name.
method_list_name
Specifies the default method list.default
Specifies the type of accounting performed.type
Applies the accounting to a service.service
Specifies the periodic accounting interval in minutes.periodic-interval
Value of the periodic accounting interval in minutes. The range is from
1 to 65535.
time
Command Default
None
Command Modes
Dynamic template configuration
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
OperationTask ID
read, writeconfig-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
29
BNG AAA Commands
accounting aaa list type service

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English