Cisco A9K-SIP-700 Command Reference

show class-map
To show the class-map related information, use the show class-map command in the EXEC mode.
show class-map type control subscriber name
Syntax Description
Displays the type of classmap.type
Displays all the control class maps.control
Displays all the subscriber control class maps.subscriber
Displays the class map name.
name
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readqos
Examples
This is a sample output of the show class-map command in the EXEC mode:
RP/0/RSP0/CPU0:router# show class-map type control subscriber PTA_CLASS
The show class-map output is as follows:
Wed Jan 23 08:55:15.027 GMT
1) ClassMap: PTA_CLASS Type: subscriber_control
Referenced by 1 Policymaps
This table describes the significant fields shown in the display.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
135
Control Policy Commands
show class-map

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English