Cisco A9K-SIP-700 Command Reference

Neighbor Discovery Commands
This module describes the Cisco IOS XR software commands used to configure the Neighbor Discovery
Commands for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details
regarding the related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router
Broadband Network Gateway Configuration Guide.
•
ipv6 nd dad attempts (BNG), page 354
•
ipv6 nd framed-prefix-pool, page 357
•
ipv6 nd managed-config-flag (BNG), page 358
•
ipv6 nd ns-interval (BNG), page 360
•
ipv6 nd nud-enable, page 362
•
ipv6 nd other-config-flag (BNG), page 363
•
ipv6 nd ra-initial, page 365
•
ipv6 nd ra-interval (BNG), page 367
•
ipv6 nd ra-lifetime (BNG), page 369
•
ipv6 nd ra-unicast, page 371
•
ipv6 nd reachable-time (BNG), page 372
•
ipv6 nd suppress-cache-learning, page 374
•
ipv6 nd suppress-ra (BNG), page 375
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
353

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English