Cisco A9K-SIP-700 Command Reference

aaa service-accounting
To set accounting parameters for service, use the aaa service-accounting command in Global Configuration
mode or Admin Configuration mode. To disable this behavior, use the no form of this command.
aaa service-accounting [extended | brief]
no aaa service-accounting [extended | brief]
Syntax Description
Sends extended service accounting records.extended
Sends brief service accounting records.brief
Command Default
The default setting is extended.
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The extended keyword allows to report all the subscriber accounting identities and state attributes within all
the service accounting records. While, the brief keyword allows to report only brief information about service
accounting records without any parent accounting record details.
Task ID
OperationTask ID
read, writeaaa
Examples
This example shows how to set service accounting parameters to send brief information about service accounting
records:
RP/0/RSP0/CPU0:router(config)# aaa service-accounting brief
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
21
BNG AAA Commands
aaa service-accounting

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English