Task ID
OperationsTask ID
read, writeconfig-services
Examples
This example shows how to set the penalty policing rate of 4 pps for the ARP protocol in the Global
Configuration mode:
RP/0/RSP0/CPU0:router(config)# lpts punt excessive-flow-trap penalty-rate arp 4
RP/0/RSP0/CPU0:router(config)#
Related Commands
DescriptionCommand
Enables the Excessive Punt Flow Trap feature.lpts punt excessive-flow-trap, on page 252
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
256
Excessive Punt Flow Trap Commands
lpts punt excessive-flow-trap penalty-rate
To Next Page
Loading...
Need help?
General
