Examples
This example shows how to enable the Excessive Punt Flow Trap feature in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)# lpts punt excessive-flow-trap
RP/0/RSP0/CPU0:router(config-control-plane-policer)#
Related Commands
DescriptionCommand
Displays the bad actor flows trapped by the Excessive Punt
Flow Trap feature.
show lpts punt excessive-flow-trap, on page 260
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
253
Excessive Punt Flow Trap Commands
lpts punt excessive-flow-trap
To Next Page
Loading...
Need help?
General
