Cisco A9K-SIP-700 Command Reference

vpdn
To configure VPDN and to enter the VPDN configuration submode, use the vpdn command in Global
Configuration mode. To disable vpdn, use the no form of this command.
vpdn{caller-id| history| l2tp| logging| session-limit| softshut| template}
no vpdn
Syntax Description
Specifies the options to apply on calling station id.caller-id
Enables VPDN history logging.history
Specifies the l2tpv2 protocol commands.l2tp
Enables logging for VPDN.logging
Allows to configure maximum simultaneous VPDN sessions.session-limit
Specifies that a new session is no longer allowed.softshut
Specifies the VPDN template configuration.template
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the vpdn command in Global Configuration mode to enter vpdn sub-configuration mode.
Task ID
OperationTask ID
read, writetunnel
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
424
PPPoE LAC-Specific Commands
vpdn

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English