Cisco A9K-SIP-700 Command Reference

authenticate (BNG)
To authenticate and specify the AAA method list that authentication should be made with in the class map
sub-configuration mode, use the authenticate command in the Global Configuration mode. To disable the
AAA method list authentication, use the no form of this command.
authenticate aaa list{list_name| default}
no authenticate
Syntax Description
Specifies the AAA parameters.aaa
Specifies AAA method list that authentication should be made with.list
Specifies the default AAA method list.default
Specifies the name of the AAA method list.
list_name
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeqos
Examples
This is an example of configuring the authenticate command in the Global Configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# policy-map type control subscriber PL1
RP/0/RSP0/CPU0:router(config-pmap)# event session-start match-first
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
116
Control Policy Commands
authenticate (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English