Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
If multiple session identification keys are present in the CoA request, an AND operation is performed such
that all the keys participate in the session selection. That is, if the CoA request contains the
Accounting-Session-ID attribute and a Framed-IP-Address, then these parameters must match on the targeted
session. For example, if the Session-ID referenced is 00001111 and the Framed-IP-Address is 10.0.0.10, and
if the BNG is having a subscriber session with ID as 00001111 but with address as 10.10.10.1, then the session
is not subjected to the CoA action. A CoA NACK is returned in this case.
Task ID
OperationTask ID
read, writeaaa
Examples
RP/0/RSP0/CPU0:router(config)# aaa server radius dynamic-author ignore server-key
Related Commands
DescriptionCommand
Displays various RADIUS statistics.show radius (BNG), on page 57
Displays all trace data for AAA sub-systemshow aaa trace, on page 55
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
24
BNG AAA Commands
aaa server radius dynamic-author
To Next Page
Loading...
Need help?
General
