Cisco A9K-SIP-700 Command Reference

ModificationRelease
Support for server profile was
added.
Release 5.1
Support for DHCP IPv6 relay was
added.
The keyword base was added as
part of DHCPv4 Service Based
Mode Selection feature.
Release 5.2.2
Usage Guidelines
The support for base profile option is available only for DHCP IPv4, and not for DHCP IPv6.
Task ID
OperationsTask ID
read, writeip-services
Examples
This is an example of attaching a base profile to an interface:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# interface gigabitEthernet 0/0/0/0 base profile
BASE_PROFILE
This is an example of enabling the DHCP interface mode on a Packet over Sonet/SDH (POS) interface using
the interface command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# interface POS 0/5/0/0 relay
This is an example of enabling the DHCP interface mode on a Packet over Sonet/SDH (POS) interface using
the interface command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# interface POS 0/5/0/0 server profile TEST
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
163
BNG DHCP Commands
interface (DHCP-BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English