aaa accounting system rp-failover
To create an accounting list to send rp-failover or rp-switchover start or stop accounting messages, use the
aaa accounting system rp-failover command in Global Configuration mode. To disable the system accounting
for rp-failover, use the no form of this command.
aaa accounting system rp-failover {list_name {start-stop| stop-only}| default {start-stop| stop-only}}
no aaa accounting system rp-failover {list_name {start-stop| stop-only}| default {start-stop| stop-only}}
Syntax Description
Specifies the accounting list name.
list_name
Specifies the default accounting list.default
Enables the start and stop records.start-stop
Enables the stop records only.stop-only
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeaaa
Examples
This is an example of configuring the aaa accounting system rp-failover command for default accounting
list:
RP/0/RSP0/CPU0:router(config)# aaa accounting system rp-failover default start-stop none
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
7
BNG AAA Commands
aaa accounting system rp-failover
To Next Page
Loading...
Need help?
General
