Cisco A9K-SIP-700 Command Reference

show pool vrf
To show the status of VRF pool, use the show pool vrf command in the EXEC mode.
show pool vrf vrf_name{ipv4|ipv6}
Syntax Description
Specifies the vrf name.
vrf_name
Displays all vrfs.all
Specifies the IPv4 pool.ipv4
Specifies the IPv6 pool.ipv6
Specifies the output modifiers.|
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Support for IPv6 was added.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Use the pool ipv4 command to enter IPv4 pool configuration submode and pool ipv6 command to enter IPv6
pool configuration submode.
Task ID
OperationTask ID
readip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
109
Address Pool Service Commands
show pool vrf

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English