Cisco A9K-SIP-700 Command Reference

show ppp interfaces (BNG)
To display PPP state information for an interface, use the show ppp interfaces command in EXEC mode.
show ppp interfaces [brief| detail] {all| type interface-path-id| location node-id}
Syntax Description
(Optional) Displays brief output for all interfaces on
the router, for a specific POS interface instance, or
for all interfaces on a specific node.
brief
(Optional) Displays detailed output for all interfaces
on the router, for a specific interface instance, or for
all interfaces on a specific node.
detail
Interface type. For more information, use the question
mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a
list of all interfaces currently configured on
the router.
Note
For more information about the syntax for the router,
use the question mark (?) online help function.
interface-path-id
(Optional) Displays detailed PPP information for all
nodes.
all
(Optional) Displays detailed PPP information for the
designated node. The node-id argument is entered in
the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.9.0
This command was supported in the dynamic template configuration
mode for BNG.
Release 4.2.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
397
BNG PPP Commands
show ppp interfaces (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English