Cisco A9K-SIP-700 Command Reference

RP/0/RSP0/CPU0:router(config-subif)# ipsubscriber ipv4 routed
RP/0/RSP0/CPU0:router(config-if-ipsub-ipv4-routed)# initiator unclassified-ip
This example shows how to host packet-triggered routed IPv6 subscriber sessions in an access-interface:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether101.201
RP/0/RSP0/CPU0:router(config-subif)# ipsubscriber ipv6 routed
RP/0/RSP0/CPU0:router(config-if-ipsub-ipv6-routed)# initiator unclassified-ip prefix-len
56
Related Commands
DescriptionCommand
Enables l2-connected IP subscriber for IPv4 or IPv6.initiator dhcp, on page 272
Enables an access-interface to host routed subscriber sessions.ipsubscriber routed, on page 282
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
275
IPoE Commands
initiator unclassified-ip

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English