show qos summary BNG
To view the QoS summary, use the show qos summary command in EXEC mode.
show qos summary {shared-policy-instance instance-name location node-id| police {interface type instance|
location node-location}| policy policy-name {interface type instance| location node-location}| queue
{interface type instance| location node-location}} {input| output} [ member type instance] [host-link type
instance] [ location node-location ][np np-location]
Syntax Description
String of up to 32 characters to identify the shared policy instance.shared-policy-instance
instance-name
Show policer interface statistics.police
String to identify the policy.
policy policy-name
Show queue statistics.queue
Interface type and instance. For more information, use the question mark
(?) online help function .
interface type instance
Identifies fully qualified location specification.
location node-location
Shows the specified policy map to the input interface.input
Shows the specified policy map to the output interface.output
(Optional) Node processor location. The node processor location is np0,
np1, np2, or np3.
The np keyword is available only for BVI interface type.
np np-location
Specifies member's interface name.
The member keyword is available only for bundle-ether, PW-Ether
and PW-IW interface types.
member
(Optional) Specifies the host-link.
This keyword is applicable only for satellite interfaces.
host-link
Command Default
None
Command Modes
EXEC mode
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
506
QOS Commands
show qos summary BNG
To Next Page
Loading...
Need help?
General
