Cisco A9K-SIP-700 Command Reference

show dhcp ipv6 proxy binding (BNG)
To display the client bindings for Dynamic Host Configuration Protocol (DHCP) proxy, use the show dhcp
ipv6 proxy binding command in EXEC mode.
show dhcp ipv6 proxy binding{detail| duid| interface| interface-id| location| mac-address| remote-id|
summary| vrf}
Syntax Description
Displays detailed bindings for proxy.detail
Displays client bindings for DUID.duid
Displays client bindings by Interface.interface
Displays client bindings by Interface ID.interface-id
Specifies the node location.location
Displays detailed client binding information.mac-address
Displays client binding by Remote ID.remote-id
Displays summary bindings for proxy.summary
Displays client bindings by VRF name.vrf
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.1.1
This command was supported for BNG.Release 4.3.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
readip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
205
BNG DHCP Commands
show dhcp ipv6 proxy binding (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English