Cisco A9K-SIP-700 Command Reference

service-policy type control subscriber
To associate a subscriber control service policy to the interface, use the service-policy type control subscriber
command in interface configuration mode. To disable the service-policy type control subscriber, use the no
form of this command.
service-policy type control subscriber name
no service-policy type control subscriber name
Syntax Description
Represents the policy map name.
name
Command Default
None
Command Modes
Interface configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeconfig-services
Examples
This is an example of configuring the service-policy type control subscriber command in interface
configuration mode:
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 344
RP/0/RSP0/CPU0:router(config-if)# service-policy type control subscriber sub1
Related Commands
DescriptionCommand
Enables the class-map.class-map type control subscriber, on page 120
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
133
Control Policy Commands
service-policy type control subscriber

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English