dynamic-template
To group a set of configuration items that can be applied to a group of subscribers and to enter the
dynamic-template configuration mode, use the dynamic-template command in the Global Configuration
mode. To disable this feature and exit the dynamic-template configuration mode, use the no form of this
command.
dynamic-template type {ipsubscriber name| ppp name| service name}
no dynamic-template
Syntax Description
Specifies the type of templates, for example, ppp or ipsubscriber or service.type
Specifies the name of the dynamic template type.
name
Specifies the ipsubscriber dynamic template type.ipsubscriber
Specifies the ppp dynamic template type.ppp
Specifies the service dynamic template type.service
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
OperationTask ID
read, writeconfig-services
Examples
This is an example of configuring the dynamic-template command in the Global Configuration mode:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
232
Dynamic Template Commands
dynamic-template
To Next Page
Loading...
Need help?
General
