Cisco A9K-SIP-700 Command Reference

deactivate
To deactivate the dynamic template mode, use the deactivate command in the class map sub-configuration
mode. To disable this feature, use the no form of this command.
deactivate dynamic-template {name aaa list {list_name| default}}
no deactivate
Syntax Description
Specifies the actions related to dynamic templates.dynamic-template
Specifies the name of the dynamic template.
name
Specifies the AAA parameters.aaa
Specifies AAA method list that authentication should be made with.list
Specifies the default AAA method list.default
Specifies the name of the AAA method list.
list_name
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
read, writeqos
Examples
This is an example of configuring the deactivate command in the class map sub-configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# policy-map type control subscriber PL1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
122
Control Policy Commands
deactivate

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English