Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeip-services
Examples
This is an example of configuring the aaa radius attribute command in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)# aaa radius attribute format e red type 40
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
20
BNG AAA Commands
aaa radius attribute
To Next Page
Loading...
Need help?
General
