Cisco A9K-SIP-700 Command Reference

Examples
This is an example of configuring the pppoe bba-group command in Global Configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# ac name red
RP/0/RSP0/CPU0:router(config-bbagroup)# service name blue
RP/0/RSP0/CPU0:router(config-bbagroup)# service selection disable
RP/0/RSP0/CPU0:router(config-bbagroup)# sessions max limit 45
RP/0/RSP0/CPU0:router(config-bbagroup)# tag ppp-max-payload minimum 689 maximum 788
Related Commands
DescriptionCommand
Enables PPPoE on an interface.pppoe enable bba-group, on page 453
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
452
PPPoE Commands
pppoe bba-group

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English