RP/0/RSP0/CPU0:router(config-subscr-red)# hold-timer 15
This example shows how to configure hold-timer for a specific SRG, in BNG geo redundancy feature scenario:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# subscriber redundancy
RP/0/RSP0/CPU0:router(config-subscr-red)# group 1
RP/0/RSP0/CPU0:router(config-subscr-red-group)# hold-timer 20
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
519
Subscriber Commands
hold-timer (subscriber redundancy)
To Next Page
Loading...
Need help?
General
