Name: Garmin G3X Touch
Brand: Garmin
Rating: 4 (1 reviews)

To Next Page

To Previous Page

190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout

Rev. AC Page 33-112

33.4.15.1 GDU 37X Test Procedure

GPS Receiver Signal Acquisition Test:

1. Power on unit (normal mode) and use the FMS Joystick to select the Info Page.

2. Verify that the GPS receiver is functional and able to calculate its present position.

Test the GPS Receiver for COM Interference:

This test must be conducted outside, as the use of a GPS repeater inside a hangar may result in a failed test.

After the preceding signal acquisition test has been completed successfully, perform the following steps:

1. Power on the unit in configuration mode and use the FMS Joystick (scroll down) to view GPS

Status on the Main Page.

Other manuals for Garmin G3X Touch

Questions and Answers:

Need help?

Do you have a question about the Garmin G3X Touch and is the answer not in the manual?

General