Name: Garmin G3X Touch
Brand: Garmin
Rating: 4 (1 reviews)

To Next Page

To Previous Page

190-01115-01 G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout

Rev. AC Page 34-125

34.4.21.1 GDU 4XX Test Procedure

GPS Receiver Signal Acquisition Test:

1. Power on unit (normal mode) and use the Touch Panel or a Move Selector Knob to select the Info

Page.

2. Verify that the GPS receiver is functional and able to calculate its present position.

Test the GPS Receiver for COM Interference:

This test must be conducted outside, as the use of a GPS repeater inside a hangar may result in a failed test.

After the preceding signal acquisition test has been completed successfully, perform the following steps:

1. Power on the unit in configuration mode and use the Touch Panel or a Move Selector Knob to view

GPS Status on the System Information Page.

Other manuals for Garmin G3X Touch

Questions and Answers:

Need help?

Do you have a question about the Garmin G3X Touch and is the answer not in the manual?

General