Name: Garmin G3X Touch
Brand: Garmin
Rating: 4 (1 reviews)

To Next Page

To Previous Page

190-01115-01 G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout

Rev. AC Page 34-159

34.4.26.23 Custom Pressure

The GEA 24 and GSU 73 MISC PRESS inputs allow the monitoring of installer-defined pressure

measurements, using the following sensor configurations:

• Kavlico P4055-50G (0-50 PSI)

• Kavlico P4055-150G (0-150 PSI)

• UMA 1EM2k

• Custom sensor

These inputs allow the display of arbitrary pressure measurements, including hydraulic pressure, and allow

the installer to specify the name of the gauge.

Custom:

This option allows the installer to enter up to 8 points of voltage-to-pressure calibration. See pin

description in Section 25

for allowable input voltage range..

Example - Custom Hydraulic Pressure Gauge

The following two screenshots are an example of an installer-defined hydraulic pressure gauge. In this

example the gauge spans from 0 to 2000 psi with green, yellow, and red + alert ranges. This example

would connect a 0-5V, 0-2000 PSI sensor to the MISC PRESS input.

Other manuals for Garmin G3X Touch

Questions and Answers:

Need help?

Do you have a question about the Garmin G3X Touch and is the answer not in the manual?

General