Name: Garmin G3X Touch
Brand: Garmin
Rating: 4 (1 reviews)

To Next Page

To Previous Page

190-01115-01 G3X/G3X Touch Installation Manual - GDU 45X Installation

Rev. AC Page 7-4

7.5 Antennas

Refer to Section 22 for antenna information.

NOTE

GDU 45X units cannot be used with GA 35, GA 36, or GA 37 antennas.

7.6 Mounting Requirements

Refer to Section 7.7 for outline and installation drawings.

7.6.1 Unit Installation

The GDU 45X is installed by holding the unit flush with the instrument panel and fastening the four 3/32”

hex socket head screws to the panel as shown in Figure 7-4

7.6.2 Panel Cutout Template

The GDU 45X Nut Plate (115-01725-00) can be used as a template when marking the panel for cutout

(Figure 7-6

) (dimensions on the figure are to verify accuracy of printout only). See Figure 7-5 for

complete cutout dimensions. A .dxf version of the drawing is also available for download at

www.garmin.com

Other manuals for Garmin G3X Touch

Questions and Answers:

Need help?

Do you have a question about the Garmin G3X Touch and is the answer not in the manual?

General