EasyManuals Logo

Garmin G3X Touch Installation Manual

Garmin G3X Touch
848 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Installation
Rev. AC Page 6-3
6.3.1.1 GDU 37X PFD Configuration Module
The GDU 37X PFD 1 display uses a configuration module designated as the master system configuration
module. The master system configuration module stores configuration data identical to the PFD
configuration data stored in the PFD memory. The PFD cross-checks the configuration module data
against internal PFD memory and self-configures to match the master system configuration module. The
PFD also maintains control of other LRUs’ configuration and calibration settings except for GSU 73
AHRS calibration settings which are stored in the GSU 73 configuration module. This allows critical data
to be retained with the airframe even if the PFD 1 display is replaced.
6.3.2 Additional Equipment Required
A 3/32” hex drive tool is required to secure the GDU 37X to the panel as described in Section 6.6.1
Unit
Installation.
Figure 6-2 GDU 37X Mounting Accessories

Table of Contents

Other manuals for Garmin G3X Touch

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin G3X Touch and is the answer not in the manual?

Garmin G3X Touch Specifications

General IconGeneral
Power Input10-32 VDC
TouchscreenYes
Built-in GPSYes
AHRSYes
Air Data ComputerYes
Aviation DatabaseYes
Terrain AwarenessYes
Operating Temperature-20°C to +55°C
Display Size10.6 inches
Display TypeLCD
ConnectivityWi-Fi, Bluetooth, USB, RS-232, CAN bus
Engine MonitoringYes
Autopilot CompatibilityYes
Traffic AwarenessYes
Weather DataYes

Related product manuals