System time
5
5.1 System time setting
This section describes commands relevant for the configuration of the system time.
5.1.1 The "show" commands
This section describes commands with which you display various settings.
5.1.1.1 show dst info
Description
This command shows all the entries for daylight saving time stored on the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show dst info
Result
The entries for daylight saving time are displayed.
5.1.1.2 show time
Description
This command shows the settings of the system clock.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 143
To Next Page
Loading...
Need help?
General