Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show vlan[brief|id<vlan-range>|summary]
The parameters have the following meaning:
Parameter Description Range of values / note
brief Shows brief information about all VLANs -
id Keyword for a VLAN or VLAN range -
vlan-range Number of the addressed VLAN or
VLAN range
1 ... 4094
Enter the range limits with a hy‐
phen or a space.
summary Shows a summary of the VLANs
If you do not select any parameter from the parameter list, the entries of all available interfaces
are displayed.
Result
The information for the selected VLAN is displayed.
6.1.1.8 show vlan device info
Description
This command shows all the global information that is valid for all VLANs.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show vlan device info
Network structures
6.1 VLAN
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
168 Configuration Manual, 07/2017, C79000-G8976-C361-06
To Next Page
Loading...
Need help?
General