Siemens SCALANCE XR-300WG User Manual

The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
no logging console
Result
The logging function is disabled on the console.
Further notes
You enable the setting with the logging console command.
As default the function is "disabled".
12.1.3 The "show" commands
This section describes commands with which you display various settings.
12.1.3.1 show events config
Description
This command shows the current configuration for forwarding the messages of the various
event types.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events config
Result
The current configuration of the events display is displayed.
Diagnostics
12.1 Event and fault handling
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 543

Siemens SCALANCE XR-300WG Specifications

General

Brand	Siemens
Model	SCALANCE XR-300WG
Category	Switch
Language	English