3.2 Load and Save
This section describes commands for displaying, copying, saving and downloading files for
the device.
Note
Note that during the installation of a previous version, the configuration data can be lost. In
this case, the device starts up with the factory configuration settings after the firmware has
been installed.
3.2.1 File list
Overview of the file types
File type Description
Config This file contains the start configuration.
Among other things, this device contains the definitions of the users. The pass‐
words are stored the file "Users".
ConfigPack Detailed configuration information. for example, start configuration, users, cer‐
tificates
ZIP file consisting of the Config, Users and LSYS fle.
Debug This file contains information for Siemens Support.
It is encrypted and can be sent by e-mail to Siemens Support without any security
risk.
EDS Electronic Data Sheet (EDS)
Electronic data sheet for describing devices in the EtherNet/IP mode
Firmware The firmware is signed and encrypted. This ensures that only firmware created
by Siemens can be downloaded to the device.
GSDML PROFINET information on the device properties
HTTPSCert Default HTTPS certificates including key
The preset and automatically created HTTPS certificates are self-signed.
We strongly recommend that you create your own HTTPS certificates and make
them available. We recommend that you use HTTPS certificates signed either
by a reliable external or by an internal certification authority. The HTTPS certifi‐
cate checks the identity of the device and controls the encrypted data exchange.
Certificates with a different format cannot be copied in.
LogFile File with entries from the event log table
MIB Private MSPS MIB file
RunningCLI Text file with CLI commands
This file contains an overview of the current configuration in the form of CLI
commands. You can download the text file. The file is not intended to be uploa‐
ded again unchanged.
Configuration
3.2 Load and Save
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
90 Configuration Manual, 07/2017, C79000-G8976-C361-06
To Next Page
Loading...
Need help?
General