10.5 Service classes
This section describes commands for configuring the assignment tables for service classes
and the Differentiated Services Code Point (DSCP).
10.5.1 The "show" commands
This section describes commands with which you display various settings.
10.5.1.1 show qos agent-priority
Description
This command shows the current priority of agent frames.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos agent-priority
Result
The current priority of the agent frames is displayed.
Further notes
You configure the priority of agent frames with the agent-priority command.
10.5.1.2 show qos broadcast-priority
Description
This command shows the current priority of broadcast frames.
Load control
10.5 Service classes
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 479
To Next Page
Loading...
Need help?
General