Siemens SCALANCE XR-300WG User Manual

Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos broadcast-priority
Result
The current priority of the broadcast frames is displayed.
Further notes
You configure the priority of broadcast frames with the broadcast-priority command.
10.5.1.3 show qos cos-map
Description
This command shows the assignment table of CoS priorities to queues.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos cos-map
Result
The assignment table of CoS priorities to queues is displayed.
Further notes
You configure the assignment of the CoS priority to a queue with the cos-map command.
Load control
10.5 Service classes
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
480 Configuration Manual, 07/2017, C79000-G8976-C361-06

Siemens SCALANCE XR-300WG Specifications

General

Brand	Siemens
Model	SCALANCE XR-300WG
Category	Switch
Language	English